HORIZONTAL TECHNICAL UNITS

BT 2.0 TECHNICAL DUCT

The BT 2.0 technical duct is a 245 x 74 mm white lacquered aluminium profile with 3 compartments and 2 covers. It is designed to accommodate electrical sockets, IT equipment, patient call systems and medical fluids.

Fully modular or integrated equipment mounting system without faceplate.

Its capacity of 196 cm3 / useful ml makes it the largest duct in its category.

BC TECHNICAL DUCT

The BC modular technical duct is a 140 x 85 mm aluminium profile painted white or aluminium grey. Its large cross-section means it can accommodate a wide range of equipment.

Equipped with a universal support, the BC duct can also accommodate electrical equipment and be superimposed on the BT and BC profiles.

Internal capacity: 119 cm3 / ml

BM TECHNICAL UNIT:

The BM fluid duct is a 102×60 mm aluminium section, lacquered in white or aluminium grey. These ducts are made to measure and delivered prepared (fixing and ventilation) or without machining in 2, 3 or 4 m units with cover.

Internal capacity: 60 cm3 / ml

BKX - BKR TECHNICAL DUCTS

The BKX modular technical duct consists of an unfinished aluminium base, 3 compartments with separate lids and rounded closing profiles. A gasket at the top provides a seal between the profile and the wall.

The BKR modular technical duct has a rounded cover replaced by a rail at the top and/or bottom, so that biomedical accessories can be placed on this 25×10 mm aluminium rail. A BR250 type rail can be installed under this enclosure to slide a trolley fitted with trays and rails.

Other possible configurations: BKXR, BKXRR, BKRR

BKX internal capacity: 180 cm3 / ml